Pro-2026 Mods

Note: It is not lawful to monitor cellular or conventional mobile telephone conversations.

The Pro-2026 has cellular frequencies deleted at the factory, but restoration is easy! Just
clip one marked wire. All you need is a Philips screwdriver and wire cutters.

1. Turn the scanner upside-down and remove the four side screws holding the bottom
cover in place; pull the cover loose and set it back about two inches out of the way.

2. Locate the small circuit board at the lower right-hand corner and find jumper L201.

3. Cut the L201 jumper and slightly separate the break.

4. Reassemble the radio which now has continuous 806-956 MHz coverage and 30 KHz
search increments in the cellular band.


Return to the Main Menu.